Clearing away any dirt, mud, or snow that may impede movement or create resistance to direction of travel from all four vehicle unstuck.
ALSO inspect to make sure that there is adequate clearance between the strap and any stationary components of the vehicle for the strap to make a full and unobstructed rotation. Make sure that there is sufficient clearance between the wheel and the wheel well for the Trac-Grabber to make a full and unobstructed rotation. THOROUGHLY INSPECT WHEEL WELL TO MAKE SURE YOUR VEHICLE HAS SUFFICIENT CLEARANCES.Do not drive over 5 mph while Trac-Grabbers are installed.
Loose Trac-Grabber may cause damage to the vehicle!DO NOT INSTALL STRAP THROUGH OPENING NEAR TIRE VALVE STEM! Feed the end of the strap through the “D” rings, PULL TIGHT, and secure the strap with the Velcro to prevent slippage. Feed the loose end of the strap through an opening in the wheel from the back side. With strap inserted through the slot in the Trac-Grabber, hold the Trac-Grabber on the wheel perpendicular to the tire tread with “D” rings on outside facing you.
+ INSTRUCTIONS FOR HOW TO GET YOUR CAR UNSTUCK Drive in REVERSE or FORWARD, whichever is the direction of least resistance and shortest direction BACK to stable terrain.*.
If you are unsure, check your vehicle owner’s manual to determine whether your vehicle is front wheel drive, rear wheel drive, or all-wheel drive. “Drive” wheels are the wheels which receive power from the engine and transmission.